It’s finally time to begin installing parts on the camouflage Porsche. Our original plan was to install the complete K24/18G kit this week along with the clutch, however scheduling conflicts made us decide to hold off another week. Instead we sent the factory ECU off to Tony @ EPL to reflash with his modified K16 Map which includes both a brake boost feature and 2 Step. We expect to have the ECU back on Friday in time for another trip to Bithlo for some additional passes down the 1320.

Since we had to wait on the ECU to be flashed (in the coming months we will have in house programing available for all EPL products), we decided to remove some more weight. We removed the factory tank of an exhaust which weighed 57lbs. We opted for AWE straight pipes weighing in around 7lbs for the pair, an overall savings of 50lbs off the back of the car!!!

While we where at it we removed the factory battery (stock is 52lbs, the one removed was aftermarket and weighed 41lbs). In place of the factory battery we installed a Deka / East Penn ETX-30 battery and made a custom bracket out of aluminum to hold it in place. The new battery was 21lbs total, saving us another 20lbs off the front of the car. We will be using a trickle charger when the car will be without use for an extended time period, however we opted for the ETX-30 rather than the ETX-14. The 30 is about 10lbs heavier, but should offer a bit of security should the car not get driven for an extended period of time.

Total savings for the day was 70lbs. We’ll be off to the track on Friday with less weight, extra power, and hopes to get kicked out for going 11.5X without a cage. After that it’s more power, less weight, the perfect combination for a better overall car.