Archive

Posts Tagged ‘suspension’

Eibach Releases Anti-Roll-Kit Performance Swaybars.

October 9th, 2009 Comments off

The new Performance Swaybar Kit from Eibach is here. Complete your suspension upgrade with an Eibach Anti-Roll-Kit. While the Pro-Kit performance springs are regarded as the primary suspension enhancement components, the Eibach Anti-Roll-Kit allows critical fine-tuning of your Mitsubishi EVO’s handling characteristics.

The Anti-Roll-Kits reduce body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation.

Manufactured from cold-formed, tubular high-strength aircraft-grade steel for precision performance, and finished with a long-lasting red powder coat finish, the Anti-Roll-Kit comes complete with all necessary mounting hardware and instructions for easy bolt-on installation.

TECHNICAL INFORMATION
FRONT:
OE bar: 25mm (1.0 in) solid
OE measured bar rate: 42 N/mm
(239 lbs/in)
OE bar weight: 5.4 kg (11.9 lbs)
Eibach bar: 29mm (1.1 in) tubular and adjustable
Eibach measured bar rate: 2 position adjustable
P1 = 49 N/mm (277 lbs/in)
P2 = 54 N/mm (308 lbs/in)
Eibach bar weight: 5.12 kg (11.3 lbs)
Bushings: New urethane bushings with grease grooves
End Link: OE

Approximate installation time: 1.5 hr

REAR:
OE bar: 23mm (0.9 in) solid
OE measured bar rate: 61N/mm
(350 lbs/in)
OE bar weight: 4.0 kg (8.8 lbs)
Eibach bar: 25mm (1.0 in) tubular and adjustable
Eibach measured bar rate: 3 position adjustable
P1 = 62 N/mm (359 lbs/in)
P2 = 69 N/mm (398 lbs/in)
P3 = 71 N/mm (407 lbs/in)
Eibach bar weight: 3.9 kg (8.6 lbs)
Bushings: New urethane bushing with grease grooves
End Link: OE

Approximate installation time: 1.0 hr