Check out the new releases form AEM. AEM has been on the leading edge of intake systems and continue to bring top quality intakes to the industry. Check out the AEM Section online or give us a call about any of the new intakes pictured here.

Wilson Manifolds have just released their new Billet Intake Manifold for the Mitsubishi EVO. Designed for high boost, high RPM applications, this manifold will hold up to 1700 HP and will make power up to 9500 RPM w/90mm throttle body. This is a full billet piece and is compatible with alcohol, and is available through Titan Motorsports.

It’s that time of year again; Christmas time. Every year many of our customers send us gifts of appreciation around Christmas time and we greatly appreciate all of them. One of our good customers, Garrett Enright owner of Phil Wood & Co sent us a wonderful collection of foreign snacks and JDM goodies. Here’s what we got:

Nikki is very excite!

Thanks again to all our customers who sent us a little holiday cheer this Christmas season.

K&N’s Research and Development Department tested the New K&N Typhoo Intake on a 2010 Chevrolet Camaro SS with a 6.2 liter V8 engine on one of their in house dynamometers. Results showed an increase across the RPM range with a peak horsepower gain of 18.12 horsepower at 5200 RPM.

In addition to power gains, K&N air intake systems are also designed to increase filtering capacity and improve throttle response. The heat shields are engineered to isolate the oversized K&N chrome top high flow air filter from engine bay heat.

This air intake kit also makes use of the Camaro’s factory fresh air duct which provides cooler outside air to the K&N air filter. This filter captures harmful particles, increases airflow and also increases service life. It will perform for up to 100,000 miles before service is required depending on driving conditions.

The mass air sensor is installed in the 90 degree bright intake tube. The mass air sensor adaptors are precision CNC machined, 6061 billet aluminum for accurate mass air flow sensor readings.

It takes about 90 minutes to install. This K&N air intake system, like all other K&N air intake systems is backed by the famous K&N Million Mile Limited Warranty.

Titan Motorsports is now an official dealer and tuner of HP Tuners’ GM line. HP Tuners provides cost effective tuning and data acquisition solutions for many GM and Ford vehicles, and has had years of success and experience in the automotive industry. Looking to get more power from your new Camaro or Corvette while still having a reliable set-up and tune? Let Titan Motorsports and HP Tuners help you safely bring out the full potential of your street machine. Give us a call about any of HP Tuners’ products. Website updates coming soon.

Running out of Nitrous on track days? Need an extra bottle to fill some of that trunk space? Then check out this new holiday special from Nitrous Express. NX is offering a free 10lb bottle to any customer who purchases a NX Nitrous System with a 10lb or 15lb bottle. Simply fill out this form, and be sure to include the UPC label from your purchase and you are good to go.

There is always something going on at the shop.

Porsche getting suspension and brakes

Pair of Lexus’

Liberty out of the race car

Project Prowler 2JZ-GTE emblem

The next step in the evolution of the turbocharger is here! Garrett GTX-R Turbos feature
all new compressor wheels with next generation aerodynamics and improved efficiency to deliver wicked performance!

Garrett GTX-R Turbochargers provide higher flow and greater boost pressure ratios beyond the world-class Garrett GT series compressor wheels.

GTX-R features

• 10%+ Gain in flow over traditional GT compressor wheel designs.
• 10%+ Higher pressure ratio compared to traditional GT compressor wheel designs.
• Forged, fully machined wheels (billet) for expedited release.
• An 11 Full-blade design for improved efficiency and ultra quiet operation.
• Outline interchangeable with Garrett® GT Series turbos.
• Garrett OE-quality for unbeatable reliability.

The map below clearly shows the gains made in compressor wheel technology over three generations of similarly-sized turbos, from T-Series, through GT and now GTX.

Initially available will be:
. GTX4294R
. GTX4202R
. GTX4508R
Click above for more details.

Guest Blog with Jessica Barton

I went out to run my car this weekend at the War of the Imports event we had at my local track. I just recently got a custom suspension set up from Titan Motorsports and it seems to have worked well, shaving off a tenth off my previous fastest pass ever. We still have some dialing in to do, but we will save that for an actual day of testing and not during an event. I wanted to run 8’s so bad today but man with it being over 90 degrees out and the track just getting worse and worse each pass, it just wasn’t going to happen. Hopefully this winter my ET’s will drop lower and lower! Thanks To Darin for getting the car all set up to run, and Titan for getting this suspension made up rather quickly. There will be more info on the suspension soon. I will say the car felt waaayyyy more stable all around on the track, and my first pass of the day I got my best 60’s ever, which was a 1.37. I am still pretty heavy (the car), I weighed it and it was 3400lbs (3393 to be exact). Here’s the video.

Basic breakdown of the slip was
1.39 60′
5.98 1/8
127mph
9.04 1/4
161mph

We have been turning out some really nice upholstery pieces ever since we added our interior division to the Titan line up. We are able to update any interior piece on any car. Whether is be the headliner, seats, arm rest, shift boot, you name it and we can do. Here are a few examples of our most recent work. The perforated leather is a nice update to the Supra interior.