Introducing the first TMS/ATI Dampened Pulley for the 3SGTE. The stock pulley has been known for breaking past the 600 horsepower range and now we have a solution. No need for custom pulleys anymore. This pulley has the same dimensions as the factory crank pulley and still retains use of the factory AC and Alternator Belt. The TMS/ATI Dampened Pulley can also be serviced. This Pulley is great for the street cars but can also withstand abuse at the track.
3S Dampened Crank Pulley
Compatible with the 3SGE/GTE along with the 5SFE.
Fitment for :
91-95 Toyota MR2
90-93 Toyota Celica All trac
94-97 JDM Celica GT4 ST205
02-07 Toyota Caldina GT4
Available Now : Titan 3SGTE Performance Crank Damper
Titan Motorsports is no stranger to big boost, with many of our turbocharged engine packages producing in excess of 50lbs of boost, making sure all that pressure reaches the combustion chamber becomes an important driver of horsepower. For over 15 years we’ve used advanced fluid coupling solutions in our race cars and using that experience we’ve managed to the best of that technology into our new Pro Boost clamps.
Machined out of aircraft grade aluminum, these easy to install are rated to hold over 150psi of pressure while remaining easy to install. The inner coupling surface comes pre-beveled allowing for a cleaner weld surface on the intercooler piping and durable O-rings that slip into the machined aluminum boost collar with minimal effort. The outer shell clamp is secured using recessed double Allen design that is both aesthetically pleasing and prevents the shell from accidently dislodging, a problem prevalent with other units that use spring clips or quick releases for closure.
These clamps come in a standard black hard anodized finish with an engraved Titan logo are available in 2.5”, 3”, 3.5”, 4” and 5” inch diameters.
Available Now : TITAN MOTORSPORTS PRO BOOST INTERCOOLER COUPLER SYSTEM
Titan Motorsports Pro Drag 3.2L Aluminum Rod stroker kit is for the serious drag racer looking for max horsepower to gain that extra edge and lower their ETs. This is a race only setup, if you’re thinking about using this in your daily driver or weekend street car think again, we’ve got plenty of other setups designed for your application. This kit has been proven in some of the fastest 2JZs in the world and comes complete with everything your machine shop needs to install minus main bearings and recomended Titan Motorsports main caps.
This 90mm Stroke crankshaft, Aluminum Rod equiped stroker kit is designed for high RPM and capable of over 2,000hp of reliable dyno proven horsepower. Included in the kit is a 90mm stroke Billet Crankshaft, Oil Drive Gear, Titan Spec GRP aluminum rods, rod bearings, Titan Race Pistons, Ring Package and Coated wrist pins. If you’re looking for the ultimate track only drag race stroker kit for your 2JZ, look no further.
Available Now : TITAN PRO DRAG 3.2L ALUMINUM ROD STROKER KIT
