Archive

Archive for August 20th, 2009

Eibach Releases 2010 Camaro Pro-Kit

August 20th, 2009 Comments off

Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. It’s our legendary spring system that dramatically improves both a vehicle’s performance and appearance.

Pro-Kit lowers your Camaro’s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.

TECHNICAL INFORMATION

FRONT:

OE rate: 29 N/mm (165 lbs/in)
PK rate: Progressive 25-39 N/mm (143-222 lbs/in)
OE wheel center to fender: 410 mm (16.1 in)
PK wheel center to fender: 383 mm (15.1 in)
Pro-Kit can be aligned to OE alignment specifications.

Approximate installation time: 1.5 hr

REAR:

OE rate: 65 N/mm (370 lbs/in)
PK rate: Progressive 51-85 N/mm (291-485 lbs/in)
OE wheel center to fender: 414 mm (16.3 in)
PK wheel center to fender: 389 mm (15.3 in)
Pro-Kit can be aligned to OE alignment specifications.

Approximate installation time: 1.5 hr

Check out Titan Motorsports for more Eibach

Weldon Racing Pumps revs up fuel filter repertoire: Additional port sizes now available!

August 20th, 2009 Comments off

Regardless of origin, even the “cleanest” of fuels can harbor flotsam, the very reason that Weldon Racing recommends two separate filters to capture these contaminants before they reach the carburetor jets or fuel injection nozzles. It is standard practice to place a filter (coarse) after the fuel tank and before the fuel pump as well as another filter (fine) after the fuel pump to capture any remaining contaminants.

Product Features:

1) Three port configurations -12, -10, and -8 AN O-ring ports
2) Full radiused inlet cap to improve fuel flow within and around filter element
3) Stainless steel end caps for durability—not bare or anodized aluminum
4) Compact size: 5.250-inch length x 2.75-inch diameter x 13 oz.
5) Bright-dipped anodized for long-lasting finish
6) Minimal pressure drop
7) More than 60 square inches of premium filtering area

Contact Titan Motorsports for all of your Weldon Racing needs.