Titan Motorsports has partnered with industry leading fastener manufacturer ARP to develop an upgraded crank bolt kit for the Toyota 2JZ engine. These upgraded units are manufactured using ARP 2000 material which offers a tensile strength of 220,000 PSI, over 45% stronger than the factory specified Grade 8 bolt. This increase in material strength is partnered with an oversized washer which is both thicker and larger in diameter to take advantage of the increased clamping load and to properly secure the damper to the crank over a larger surface area.

The additional clamp load delivered helps secure the harmonic damper to the crankshaft allowing it to function as designed, absorbing the unwanted kinetic energy caused by undesired movement of the crankshaft. This reduces the risk of the damper loosening from the crankshaft that can occur in racing environments where high RPMs are the norm. This bolt kit is designed to work with the OEM crank pulley, however we recommend it be paired with our Titan Motorsports Crank Damper to offer the ultimate in protection for your engine.

Available Now : TITAN MOTORSPORTS ARP 2000 2JZ CRANK BOLT

Leading the path to big horsepower from the VR38, we’ve found many parts that aren’t up to the task of reliably delivering performance beyond Nissans original benchmarks. Upon a resent teardown we noticed some abnormal fretting of the flywheel in the areas where it mounts to the crankshaft. This particular failure can be seen when tearing down the engine, but it also could be the reason for the engine teardown. This fretting requires replacement of the crank and/or flywheel in most situations. It goes without saying, this is a very expensive repair.

A joint venture between T1 Race Development, ARP and Titan Motorsports resulted in a custom designed and manufactured fastener to better cope with the higher torque loads requested in our GTR applications. The new fasteners are produced In ARP’s 2000 material with a black oxide finish, and require a 12 point ½” socket for assembly. The ARP 2000 material has a much higher tensile strength of 220,000 PSI versus the stock bolts rating of 140,000 PSI. The increase in tensile strength allows us to administer a higher torque spec of 140ft/lbs. We also recommend applying Blue Loctite for added insurance, it’s important that the Loctite only gets on the threads of the bolt, and not between the flywheel and crank, or bolt head and flywheel.

Available Now : TITAN X T1GTR R35 NISSAN GTR FLYWHEEL BOLT KIT

On March 5th we hosted our 7th Annual Titan Motorsports Open House at our headquarters in Orlando, FL. This event has grown larger than we ever could have expected it to since holding the first open house 7 years ago, when our new facility opened. Each year we do our best to give the local enthusiasts an event they can enjoy, as well as raise money for local charities in need. After calculating the numbers for this years event we raised $15,503.27 with the event. The proceeds of which will help benefit 3 charities close to our hearts: Just in Queso Foundation, Florida Little Dog Rescue, and the Arnold Palmer Medical Center Foundation.

With over 1,200 event RSVPs and 1,800 additional Interested parties through Facebook in the days leading up to the event. This was one of our largest Open houses yet. Our entire complex was filled to capacity along with nearly every available square inch surrounding where ever a car could be parked. We are already looking forward to next years event and hope to raise even more money for charity as well as providing a great place for motorsports enthusiasts to gather and enjoy our facility with the many great cars that attend. We want to thank all of our loyal fans and supporters for attending the event and continue to make it such a success year over year. We’d also like to thank our great sponsors, without them this event would not be possible:

King Bearings, Gates Racing, Manley Performance, NGK, Royal Purple, Fuel Injector Clinic, Weld Racing, Royal Purple, Fragola, DEI, Precision Turbo, Stoptech, Aeromotive, Edelbrock, ARP, AEM, Porsche of Orlando, Sunstate Auto Glass, Weld, CCW, Wiseco, Fidanza, Denso, ACL, Simply Clean, ILDS, Highway Star Garage

The R35 Nissan GTR factory mass air flow sensors have difficulty reading the additional airflow
provided with upgraded turbos and aftermarket blow off valves and in high boost OEM applications. To remedy this problem, the air volume must be converted to a speed density setup requiring the air temp sensor to be moved post-intercooler and a MAP sensor installed. Titan Motorsports has
created a plug-and-play kit that resolves this problem relocating the intake air temperature sensor from the factory MAF Housing to the Upper intercooler upper pipe.

This kit is a recommended upgrade for R35 GTRs making more than 700whp or those wanting to run Vent-to-Atmosphere Blow-Off Valves. This installation takes 5 minutes and the included Plug-N-Play harness allows the car to be returned to stock. It should be noted this modification will require an ECU re-tune calibration for Speed Density, with proper calibration there is no change in drivability.

Included in this kit :
-Intake Air Temperature and Map Sensor (all in one)
– Motorsports Grade Plug and Play Harness

Available Now on Site : Titan Motorsports R35 GTR Speed Density Kit

Titan Motorsports is now offering a direct replacement Carbon Ceramic brake package for the R35 Nissan GTR. Carbon Ceramic brakes are a popular options found on some of the best high performance sports cars and supercars in the world, so why not upgrade your GTR to these same standards.

With our carbon ceramic brake upgrade, over 60lb is removed in rotational mass. As important as the 60lbs is to the gross vehicle weight, a reduction in rotational mass improves acceleration and reduce drivetrain stress. These brakes also offer improved stopping power over the stock steel rotor setup, without the increased squeal that occurs when using steel brakes and race pads. This setup works perfect for nearly any type of performance driving, from the street to the strip to the runway these brakes offer improved performance across the board.

Provisions have been made for the factory parking brake to be incorporated into this upgrade, keeping your cars emergency brake functions as the OE originally intended. For the neat freaks out there, carbon ceramic brakes are known to produce significantly less brake dust than their steel counter parts keeping your wheels much cleaner in the process.

Included in the kit:
Front and Rear Brembo Carbon Ceramic disk with custom GTR fitment Hard Anodized Billet Hats, Front and Rear Carbon Ceramic Specific Performance Brake Pads, and Billet Hard Anodized Caliper Spacer Brackets

*This kit requires the rear calipers to be clearance for installation, detailed instructions can be provided.

Available Now : TITAN MOTORSPORTS R35 NISSAN GTR CARBON CERAMIC BRAKE KIT

Introducing the first TMS/ATI Dampened Pulley for the 3SGTE. The stock pulley has been known for breaking past the 600 horsepower range and now we have a solution. No need for custom pulleys anymore. This pulley has the same dimensions as the factory crank pulley and still retains use of the factory AC and Alternator Belt. The TMS/ATI Dampened Pulley can also be serviced. This Pulley is great for the street cars but can also withstand abuse at the track.

3S Dampened Crank Pulley

Compatible with the 3SGE/GTE along with the 5SFE.

Fitment for :
91-95 Toyota MR2
90-93 Toyota Celica All trac
94-97 JDM Celica GT4 ST205
02-07 Toyota Caldina GT4

Available Now : Titan 3SGTE Performance Crank Damper

Titan Motorsports is no stranger to big boost, with many of our turbocharged engine packages producing in excess of 50lbs of boost, making sure all that pressure reaches the combustion chamber becomes an important driver of horsepower. For over 15 years we’ve used advanced fluid coupling solutions in our race cars and using that experience we’ve managed to the best of that technology into our new Pro Boost clamps.

Machined out of aircraft grade aluminum, these easy to install are rated to hold over 150psi of pressure while remaining easy to install. The inner coupling surface comes pre-beveled allowing for a cleaner weld surface on the intercooler piping and durable O-rings that slip into the machined aluminum boost collar with minimal effort. The outer shell clamp is secured using recessed double Allen design that is both aesthetically pleasing and prevents the shell from accidently dislodging, a problem prevalent with other units that use spring clips or quick releases for closure.

These clamps come in a standard black hard anodized finish with an engraved Titan logo are available in 2.5”, 3”, 3.5”, 4” and 5” inch diameters.

Available Now : TITAN MOTORSPORTS PRO BOOST INTERCOOLER COUPLER SYSTEM

Titan Motorsports Pro Drag 3.2L Aluminum Rod stroker kit is for the serious drag racer looking for max horsepower to gain that extra edge and lower their ETs. This is a race only setup, if you’re thinking about using this in your daily driver or weekend street car think again, we’ve got plenty of other setups designed for your application. This kit has been proven in some of the fastest 2JZs in the world and comes complete with everything your machine shop needs to install minus main bearings and recomended Titan Motorsports main caps.

This 90mm Stroke crankshaft, Aluminum Rod equiped stroker kit is designed for high RPM and capable of over 2,000hp of reliable dyno proven horsepower. Included in the kit is a 90mm stroke Billet Crankshaft, Oil Drive Gear, Titan Spec GRP aluminum rods, rod bearings, Titan Race Pistons, Ring Package and Coated wrist pins. If you’re looking for the ultimate track only drag race stroker kit for your 2JZ, look no further.

Available Now : TITAN PRO DRAG 3.2L ALUMINUM ROD STROKER KIT

Titan Motorsports is looking forward to continued growth in 2016 and as a result we are currently hiring for 2 positions in our Orlando, FL main office.

Available Positions :

-Information Technology Specialist
-Customer Service Representative

Qualified Applications, Please email resumes to hr@titanmotorsports.com, at this time no phone inquiries will be accepted in regards to these positions.

Job Title : Customer Service Representative

Description:
Titan Motorsports is hiring for customer service position
Are you a into cars, racing, automobiles, want to take your passion to the next level and into a career?

ENTRY LEVEL~ FILLING IMMEDIATELY!!! Degree…No Experience? Experience… No Degree?

FULL PAID TRAINING PROVIDED!
CUSTOMER SERVICE

Job Requirements:
Who We’re Looking For:

You must be ENTRY LEVEL.
You must possess great people skills.
You must demonstrate excellent work ethic.
You must have the ability to use a PC, type, and utilize Outlook, XL, Word, Internet
You must have a positive business attitude like the rest of our enthusiastic staff.
You must be confident you’ll be successful, just waiting for a career opportunity where you can prove yourself.

PROMOTIONS based upon performance.
No Experience Necessary!

Job Description:
We are looking for people with potential and an ambitious drive, rather than experience, to aggressively expand in the performance marketplace.

We have an aggressive expansion plan laid out and are looking to find a person who would love to work in a, fun, competitive, positive-minded environment.

Job Title : Information Technology Specialist

Description:
Titan Motorsports is looking for an Information Technology Specialist to join our IT team. The successful applicant will be working with updating inventory, image and catalog type data. This person will also be working under direction with office hardware, networking and phone systems as needed to upgrade and troubleshoot equipment and software. Titan Motorsports is a leader in providing high quality automotive parts to enthusiasts who strive for more performance. As such the person we are looking for needs to be an enthusiast as well with knowledge of the Automotive Performance and Motorsport industry.

Duties Responsibilities:
• Data Entry – This position will be updating inventory descriptions and uploading related images.
• Computer Support including Configuration and Deployment
• Networking and Phone Support

Job Requirements:
• 3+ years of relevant hands-on experience in the Automotive Performance and Motorsport industry.
• Knowledge of Automotive basics including verbiage and functionality.
• Familiarity with Automotive parts and parts manufacturers.
• Experience with Windows workstations and Microsoft Office Tools.
• Basic knowledge of computer hardware and networking.
• Able to create Excel worksheets manually as well as attaching to external data sources.
• Basic SQL skills working with databases like MS Access and SQL Server.
• Ability to effectively communicate with people at various levels of business and technical expertise. (You co-workers are your customers.)
• Ability to work independently an efficiently to meet deadlines.
• Able to promptly answer support related email, phone calls and other electronic communications.
• Passion for Automotive Performance and Motorsport and Racing!

Computer Skills:
• Operating System administration and troubleshooting.
• Networking fundamentals and troubleshooting.
• Hardware installation and troubleshooting.
• Software installation and troubleshooting.
• Typing proficiency: 40-60 wpm.
• Proficient in internet related applications such as E-Mail clients, FTP clients and Web Browsers.

AEM just wrapped up an in depth 2 day training session focused on their Infinity line of Engine Management Systems at our Titan Motorsports headquarters here in Orlando. The class was led by AEM’s VP of Electronics Devin Pearce and included both classroom instruction in our conference room as well as real world implementation tuning on our Dynojet.

Attendees flew in from around the country and were educated on the AEM Infinity’s basic features to advanced functions and vehicle specific tips and tweaks. The class took the tuners through a complete install using one of AEM’s newest plug and play systems for the Porsche 996 platform, starting the day with a bone stock vehicle using the factory ECU to a completed tune on the Infinity allowing the vehicle to drive away and head to any race track or drag strip.