Posts Tagged ‘Air Intake’

Honda CR-Z HKS Intake

February 11th, 2011 Comments off

The stock engine bay looks pretty plain, and definitely isn’t geared towards a ton of performance. However tuning powerhouse HKS has come up with a solution for that.

Here you can see the CR-Z in stock form, with its restrictive intake track with stock filter.

Here we have installed the HKS Racing Suction Reloaded intake which utilizes HKS’ high-flowing wet 2-layer dual density polyurethane filter element. The intake kits offer the same simple and easy filter element replacement process as previous generations; avoiding the need to wash or re-oil the intake filter.

The new Super Honeycomb frame allows for 30% more intake surface area for improved throttle response. Additionally the filter assembly features a new streamline inner frame that reduces weight and allows for air to flow more smoothly into the engine.

New K&N Intake for FJ Cruiser/4Runner

September 15th, 2010 Comments off

The K&N 77-9034KP intake system is designed to replace the factory air filter, air box, and air intake tube with components which are less restrictive, so that the vehicle’s engine performs up to its full potential. Installation of the 77-9034KP is easy, and begins with the removal of the stock intake pieces. In their place go a brightly finished, mandrel-bent aluminum tube, and a large cone shaped air filter that can withstand the abuse of dust and dirt on any trail these vehicles might venture down.

These components have been designed by K&N engineers to be much less restrictive to air flow than their factory counterparts. With K&N’s intake these engines will not waste power trying to pull in the air they need. In addition to being less restrictive, the K&N air filter included in this system (part number RF-1044XD) is protected by a powdercoated steel heat shield, which helps keep intake air temperatures down where they belong. A K&N test on this filter design resulted in showing it has excellent filtration at 99.01% overall efficiency (ISO 5011 test results). According to testing performed on K&N’s dynamometer, the air intake system pushes out an impressive additional 13.55 horsepower and 14.55 lb. ft. torque at 5000 RPM on a 2010 Toyota FJ Cruiser. The 77-9034KP is backed by K&N’s Million Mile Limited Warranty.

Click here for the dyno sheet

Born to Race/Injen Contest

September 2nd, 2010 Comments off

Injen Technology has partnered with Hollywood…. and is sponsoring a nationwide contest to find a car to be used in the movie. The owner and a guest will be flown to Hollywood and the winning car will be professionally tailored to the set of “Born to Race”. The car will be incorporated into the movie and the visiting owner will be allowed on the set during filming and will meet the actors. The movie credits will include the car owner as well. But, the Grand Prize will be that Injen Technology will give the owner a FREE intake for their prize winning car. So basically you get famous and win awesome Injen parts. Sounds pretty sweet to me!

Check out the Injen website for more info

Injen Releases New Intake For 09-10 Nismo 370z

February 5th, 2010 Comments off

Gains of up to 13 h/p 10 ft/lbs of torque for your Nismo 370z

Featured benefits:

• MR Technology Tunes intakes to factory air/fuel ratios)
• Air Fusion (Controls short/long term fuel trim levels)
• Air Intake Horns (smoothes air turbulence and speeds up air into the intakes)
• Injen/AMSOIL Ea nano-fiber performance dry filter
• Machined and tuned sensor adapter
• Calibrated sensor housing
• Mandrel-bent aluminum tubing
• Replacement reservoir bottle

Injen Technology’s new twin intakes for the Nismo 370z not only look impressive, but they are massive too! Equiped with the only patented MR step-down process available, Air fusion and air intake hons, the Nismo 370z will command respect with one touch of the accelerator. Boasting an astonishing 13 horsepower and 10ft/lbs. of torgue, these twins will be the envey on the track. In addition, Injen uses the only surface loading, webbed media in all its filters, the same ones used in the US Army’s M1 Tanks. The Ea nano-fiber blue filter removes 5 times more dust then the traditional (paper) filter media and 50 times more dust then the oiled cotton gauze filter. Click here for more info.

Injen Releases New Intake For 08-10 Lexus IS-F 5.0L V8

February 3rd, 2010 Comments off

Discover an extra 26 1/2 HP and 37 1/2 Ft Lbs of Torque packed into the Lexus IS-F!

Featured benefits:

• MR Technology (Tunes intake to factory air/fuel ratios)
• Air Fusion (Controls short/long term fuel trim levels)
• Injen/AMSOIL Ea nano-fiber performance dry filter
• Machined and tuned sensor adapter
• Calibrated sensor housing
• Functional Heat Shield to deflect heat
• 3 ½ “ mandrel-bent aluminum tubing
• Built in 5” Velocity Stack

Superior and unparalleled technology is what goes into the all new SP2096. Protected by Three US patents, the IS-F comes equipped with the only MR Tech step-down process and Air Fusion as invented and perfected by Injen Technology. You’ll never have to worry about rich or lean conditions again because Injen pre-tunes and recalibrates the Intake to factory specs.

K&N Releases New 2010 Camaro Intake Kit

January 21st, 2010 Comments off

K&N’s 63 Series AirCharger Intake Kits are guaranteed to increase horsepower and come with a Million Mile Limited Warranty. K&N intake systems replace your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The filters on these kits are washable and reusable.

Click here for more info.