Titan Motorsports, Inc. experienced stable growth in 2011, and as a result we’re looking to expand upon our fabrication team. We are looking for highly motivated individuals interested in becoming a part of our fabrication team. The position available is for a full time position at our location on 11370 Boggy Creek Rd, near Orlando International Airport. Applicant would need to be available during our normally operating hours of 9am-6pm, Monday through Friday. Compensation / benefits packaged will be determined based on applicants qualifications and will be discussed upon submission of resume.
Qualified participates should email a resume to nero@titanmotorsports.com. Please do not call about this posting or follow up for further correspondence, we will contact you. Selection applicants will need to come in for a series of interviews, we are looking to fill this position immediately.
Job Functions:
Welding and Custom fabrication of Titan Motorsports products not limited to turbo manifolds, turbo kits, roll bars, and other custom fabricated race parts.
Required Skills:
Master Welder, Fabrication Experience in Automotive or Race Shop preferred, experience workings with jigs and custom fixtures for production welding.
Additional Information:
(suggest including, name, previous jobs, recommendations, age, car you drive, and why you are interested in this field).
We recently attended the Sarasota Exotic Car Fest which took place on beautiful St. Armands circle in Sarasota,FL. This was our first time making the trip to Southwest Florida for the show, but it surely won’t be the last. Hundreds of great exotic cars filled the famed circle, from Lamborghini to McLarens, and the show even featured 2 special edition Bugatti Veyrons. The highlight of the weekend for us was famed Lamborghini test driver Valentino Balboni stopping by to take a closer look at our Twin Turbo Gallardo and voicing his approval, we we’re hoping to have him test drive the car but he had a flight out immediately following the event.
This is the all new Carbon Fiber Driveshaft from DSS, this shaft is designed to be installed with out the Drive Guibo joints as a direct fit to the 3 finger flanges on the car. This shaft is only 4.2lbs and with out the Guibos it will let the trans shift faster than you though the car could. there is a few small modifications to make it work. The 3 finger mounts on each end will have to have the threads drilled out (need a 15/32 drill) The shaft will have studs in the end for the Diff that nuts will secure it to the mount and on the Engine end it will have Allen head bolts. Not a bad job to do at all and saves allot of weight. The tube we using was a special wound High Modulus one that will handle 1000Hp and 1000lbs of torque. shafts are made to order and take 7-12 days.
Part Number: GMC6M-1-CF Retail : $1,299.00
Titan Motorsport carries the complete lineup of Driveshaft Shop drive shafts and drive line components for all makes and models.
MoTeC Systems USA is now offering dedicated Plug-In ECU Kits for bike engines based on MoTeC’s new M84 ECU. These convenient, cost effective solutions are fully programmable, direct replacements for factory ECUs on a number of popular models, giving customers adjustable control over fuel and ignition. The complete package includes the new M84 ECU*, an Adapter Box (with spare inputs/outputs), the necessary wiring and mounting hardware, plus additional model-specific modules or sensors that may be required.
Features include: progressive nitrous • boost control • shift control including gear change ignition cut • shift light • full staged injection • Lambda control.
MODELS: HAYABUSA GEN I/GEN II, KAWASAKI ZX14, SUZUKI 1000
KIT INCLUDES:
• Fully enabled MoTeC M84 ECU*
– includes Advanced Functions, Wideband Lambda and Data Logging
• Adapter Box for stock wiring harness
• Wiring Harness (Adapter Box to ECU)
• UTC Adapter (USB to CAN)
• Bosch 4 Channel Ignitor
• LSU 4.9 Lambda Sensor
• Mounting hardware
• Base ECU Map
The Adapter Box also includes a 26 pin spare connector for the easy addition of extra sensors and outputs.
The complete kit retails for $3,995.00 for additional pricing or information please call or email us.
Our annual open house will take place this year March 10th, please see the flyer for details and spread the word. Last year we had a great turnout, this year we’re expecting an even bigger one with new events such as a bikini contest, bigger purses, and the same great cause with proceeds benefiting Just In Queso Foundation. Email nikki@titanmotorsports.com with any questions or sponsorship opportunities.
Aeromotions Inc. announced the launch of their new GT-R R35 splitter. Over a year of computer modeling, analysis, and track testing led to the unique design. While the top of the splitter appears normal, the bottom of the splitter has CNC cut venturis to feed air into the stock GT-R front venturis. This system works to enhance the great engineering already present in the R35 GT-R, while eliminating some of the factory under steer.
The three-piece splitter is constructed from Amarin Fiber, a revolutionary composite that has strength-to-weight properties similar to carbon-fiber, but adds much greater impact and wear resistance. The piece is perfect for endurance-racing applications. The splitter mounts directly to the frame and air-dam with the included stainless steel hardware. Installation is simple, and individual segments of the splitter can be replaced in the event of damage. Made in the USA. Off-Road use only.
This weekend we attended the 8th annual Cars for the Cure show in Lake Mary, FL benefiting the American Lung Association. We brought out Daniel’s black Stage-2 Lamborghini Gallardo Twin Turbo, George Bonafede’s Red Nissan GTR, Nero’s personal E92 M3, and my newly acquired Porsche 996 GT3. There were plenty of great cars in attendance from new dealer cars, to highly tuned exotics, with the center piece of the event being a 1 of 1 Bugatti Veyron Sang Bleu. We’d like to thank the ALA and it’s great volunteers who made this event such a success. We’ve had the pleasure of attending this event since it’s inception over 8 years ago and look forward to attending yet again next year.
The Titan B Series Honda Head Studs are constructed using the highest quality 8740 alloy (made of Nickel Chromium-molybdenum steel), which has been heat treaded to 190,000 PSI. We use 8740 alloy with Nickel Chromium because it means that these head studs are more durable with better toughness than standard 4130 alloy head studs.
If you are looking for a quality product for your Honda build, backed by one of the most trusted names in import performance, look no further. Titan Motorsports is proud to release these to the Honda market and they are in stock and ready to ship in January 2012. These are designed for all Honda B Series engine performance setups, from an all-motor street build to a purpose built, forced induction race engine. Trust your car to Titan Motorsports engineering and get the edge on the competition!
We recently completed this stunning Lexus SC300 for Jerome Williams after an detail intensive long term build. This SC300 features a stock 2JZ shortblock making over 848hp on E85 fuel. It’s chromed out engine bay features many one-off pieces fabricated strictly for this build. The modifications don’t stop at the engine bay, this complete build features a Vertex body kit, black diamond paint, Brembo big brake kit, Auto Couture wheels, and a host of other modifications that truly make it one WickedSC.
Titan Motorsports Hiring : Sales Representative Position
Titan Motorsports, Inc. experienced stable growth in 2011, and as a result we’re looking to expand upon our sales team. We are looking for highly motivated individuals interested in becoming a part of our sales team. The position available is for a full time sales representative at location on 11370 Boggy Creek Rd, near Orlando International Airport. Applicant would need to be available during our normally operating hours of 9am-6pm, Monday through Friday. Compensation / benefits packaged will be determined based on applicants qualifications and will be discussed upon submission of resume.
Qualified participates should email a resume to nero@titanmotorsports.com. Please do not call about this posting or follow up for further correspondence, we will contact you. Selection applicants will need to come in for a series of interviews, we are looking to fill this position immediately.
Job Functions:
Recommend, select, and help locate or obtain merchandise based on customer needs and desires. Maintain retail and phone sales relationships with existing and potential customers.
Required Skills:
Microsoft Outlook, Microsoft Excel, General Automotive / Import Performance Knowledge and Great Communication Skills.
Additional Information:
(suggest including, name, previous jobs, recommendations, age, car you drive, and why you are interested in this field).
